The installation of radiators has three principles

Release Time：2023-06-20

①Can use plate type not tube type. Because in the case of the same heat dissipation, the plate type heat sink than the tube type heat sink volume is 1/3 smaller, and faster than the tube type heat dissipation, energy saving.

②Can use low not high, this is because the hot air is moving from bottom to top, the lower the more uniform heating, the lower the more suitable

③ can be close to the window not away from the window, this is because the cold air is mainly from the window, the radiator placed near the window can immediately heat in the cold air so that the entire room temperature field uniform, suitable. If the radiator is far from the window, the indoor temperature difference will occur.

Assembly specification of insert radiator

Installation of radiators should take into account the maintenance

Assembly specification of insert radiator

Installation of radiators should take into account the maintenance

CATEGORY

Related News

Dexin will meet you at Automechanika Dubai 2023

Guangzhou Dexin Radiator Co., Ltd. is a professional manufacturer of automotive radiator research and development, design, production, sales and after-sales service. The main products include large, medium, small cars’ radiators and construction machinery special radiators.

2023-09-22

Automechanika Dubai 2023

One of the world's largest automotive parts series, AUTOMECHANIKA, travels around the world

2023-09-22

Insert radiator processing process

Insert radiator piece of insert are manufacturers of aluminum plate with punch processing, and then inserted piece by piece into the small slot on the heat sink base, finishing through external pressure makes a tight connection in the radiator bottom sit, this insert radiator in the equipment heat dissipation is more widely used.

2023-06-20

Assembly specification of insert radiator

Insert radiator is now a common radiator for home use, insert radiator is through the straight tube push through the expansion machine for the account tube makes deformation, and then rebound combined, and the use of plug-in assembly can be 100 percent not leak. So reduce a lot of energy waste, and insert radiator in the assembly process does not require welding, the surface of the insert radiator no overheating effect. Below, briefly introduce the assembly specifications of the insert radiator.

2023-06-20

Related News

Dexin will meet you at Automechanika Dubai 2023

2023-09-22

Automechanika Dubai 2023

One of the world's largest automotive parts series, AUTOMECHANIKA, travels around the world

2023-09-22

Insert radiator processing process

2023-06-20

Assembly specification of insert radiator

2023-06-20

Guangzhou Dexin Radiator Co., Ltd. is a leading manufacturer specializing in auto cooling-system with a history over 8 years in Guangzhou, China. We develop and produce auto radiator, condenser and related cooling products.