Principle of radiator

Release Time：2017-04-19

Car radiator principle:

The function of the car cooling system is to keep the car in the proper temperature range under all operating conditions. The cooling system of the car is air-cooled and water-cooled. Air as the cooling medium known as the air-cooled system to coolant for the cooling medium known as the water-cooled system. Usually the water cooling system consists of water pump, radiator, cooling fan, thermostat, compensating bucket, engine body and cylinder cover in the water jacket and other ancillary devices and other components. Among them, the radiator is responsible for circulating water cooling, its water pipes and heat sinks made of aluminum, aluminum pipes made of flat shape, heat sink with corrugated, pay attention to heat dissipation, the installation direction perpendicular to the direction of air flow, as far as possible Do a little wind resistance, cooling efficiency is higher. The coolant flows in the radiator core and the air passes through the radiator core. The hot coolant is cooled by cooling the air and the cold air heats up by absorbing the heat dissipated by the coolant, so the radiator is a heat exchanger..

Composition and function of led radiator fins

The development of new radiator usher in a harmonious era of heating

Composition and function of led radiator fins

The development of new radiator usher in a harmonious era of heating

CATEGORY

Related News

Dexin will meet you at Automechanika Dubai 2023

Guangzhou Dexin Radiator Co., Ltd. is a professional manufacturer of automotive radiator research and development, design, production, sales and after-sales service. The main products include large, medium, small cars’ radiators and construction machinery special radiators.

2023-09-22

Automechanika Dubai 2023

One of the world's largest automotive parts series, AUTOMECHANIKA, travels around the world

2023-09-22

Insert radiator processing process

Insert radiator piece of insert are manufacturers of aluminum plate with punch processing, and then inserted piece by piece into the small slot on the heat sink base, finishing through external pressure makes a tight connection in the radiator bottom sit, this insert radiator in the equipment heat dissipation is more widely used.

2023-06-20

Assembly specification of insert radiator

Insert radiator is now a common radiator for home use, insert radiator is through the straight tube push through the expansion machine for the account tube makes deformation, and then rebound combined, and the use of plug-in assembly can be 100 percent not leak. So reduce a lot of energy waste, and insert radiator in the assembly process does not require welding, the surface of the insert radiator no overheating effect. Below, briefly introduce the assembly specifications of the insert radiator.

2023-06-20

Related News

Dexin will meet you at Automechanika Dubai 2023

2023-09-22

Automechanika Dubai 2023

One of the world's largest automotive parts series, AUTOMECHANIKA, travels around the world

2023-09-22

Insert radiator processing process

2023-06-20

Assembly specification of insert radiator

2023-06-20

Guangzhou Dexin Radiator Co., Ltd. is a leading manufacturer specializing in auto cooling-system with a history over 8 years in Guangzhou, China. We develop and produce auto radiator, condenser and related cooling products.