Assembly specification of insert radiator

Insert radiator is now a common radiator for home use, insert radiator is through the straight tube push through the expansion machine for the account tube makes deformation, and then rebound combined, and the use of plug-in assembly can be 100 percent not leak. So reduce a lot of energy waste, and insert radiator in the assembly process does not require welding, the surface of the insert radiator no overheating effect. Below, briefly introduce the assembly specifications of the insert radiator.

The installation of radiators has three principles

①Can use plate type not tube type. Because in the case of the same heat dissipation, the plate type heat sink than the tube type heat sink volume is 1/3 smaller, and faster than the tube type heat dissipation, energy saving.

Installation of radiators should take into account the maintenance

Radiator correct use instructions:

Aluminum radiator selection and installation and use of instructions

Electronic products, including large machinery and equipment, a very important part or workpiece is heat dissipation, often currently are using matching aluminum radiator, but there are individuals who will buy their own very good quality aluminum radiator, so when buying aluminum radiator need to pay attention to what issues?

Aluminum radiator has become an important part of production and life

In our production and life, aluminum profiles can be seen everywhere, including industrial aluminum profiles for industrial production and manufacturing, as well as aluminum profiles for construction. What we are talking about here is the aluminum radiator. There are large ones and small ones, although some are inconspicuous, but their effects are not small. It is mainly used for heat dissipation of various power electronic equipment, LED lighting fixtures, and computer digital products. The aluminum profile radiator has the characteristics of beautiful appearance, light weight, good heat dissipation performance, and good energy-saving effect. Due to the different requirements for water quality between aluminum radiators and steel, it is necessary to avoid mixing aluminum radiators with other materials for installation.

Basic production process of heat sink

A heat sink is a device that dissipates heat for easily heating electronic components in electrical appliances. It is usually made of aluminum alloy, brass, or bronze in plate, sheet, or multiple sheet shapes. Generally, during use, a layer of thermal conductive silicone grease is applied to the contact surface between the electronic components and the heat sink, allowing the heat emitted by the components to be more effectively transmitted to the heat sink, which then dissipates into the surrounding air. In terms of heat sink materials, the thermal conductivity of each material is different, ranging from high to low, namely silver, copper, aluminum, and steel.